How to Replace a Saab 9-3 Key
The Saab 9-3 has a good variety of appeal to drivers. It is powerful and has good visibility. It has a very high safety rating.
It is nevertheless important to ensure that you have at least two keys that work for your vehicle. It can be expensive to replace a key if you lose it.
How to replace the ignition Key on a Saab 9-3
If your car key won't turn on and you want to replace it, you'll need to replace it. This guide will show you how to replace the ignition key on the Saab 9-3. You'll need a replacement key, a new reprogrammable battery as well as a new key-fob case.
Modern Saab models use transponders instead of a traditional key to unlock the vehicle and allow it to start. The rechargeable batteries contained in the key-fob will eventually expire, and they aren't able to hold any charge. This is especially when you keep using the same key for the same lock.
The good part is that the battery is easily replaced by a professional locksmith. You can also do it yourself if have the appropriate tools and a bit of patience. The first step is taking the key-fob out. This is accomplished by inserting a flathead screwdriver in the slot located in the middle of the case. It is essential to work slowly, since the plastic is extremely thin and easily damaged.
Once the case is open, you can prepare the new key by combining the lower section of the old key with the transponder and banana on the new key. This will ensure the new key is properly paired to your CIM that can make a significant difference when replacing the sole key on your Saab 9-3.
How to replace the ignition Key on the Saab 900
If you don't have two keys, you will have to take off the dashboard and steering wheel in order to access the ignition. Start by disconnecting the negative battery cable. Once the battery is disconnected, you are able to remove the trim and dashboard pieces that surround the steering wheel. Once the dash has been removed, you can push a screwdriver into the hole on the back of the ignition switch and pull it out.
The ignition barrel has a key lock that can prevent the vehicle from starting if key isn't in it. If the ignition switch of your 900 isn't working properly, check the key to determine whether it's inside the lock or snared into the ignition barrel. It is also recommended to rotate your keys and keep them clean to avoid breaking.
Saab cars differ from other cars due to the fact that they do not have traditional keys made of metal. Instead, saab replacement key programming is able to recognize electronic signals coming from the key fob via an specialized microchip inside.
If you only lose one working key fob, your dealer will charge the cost of replacing your computer module (also known as the CIM). However, we can reprogram the existing computer's EEPROM to prepare it to accept new keys without replacing it. You'll save up to 50% off the price charged by the dealer! We call it the SAAB KEY PROGRAM. Find out more information about it here!
How to replace the ignition Key in a Saab9-5
The metal component of a traditional Saab key is simple to copy, and it's not much of a deterrent against theft of vehicles. The electronic part of the key-fob is equipped with a chip that can recognize the car when the key is placed in the ignition switch.
Saab's anti-theft system has relied upon this technology for over a decade. It's not as effective as a physical door lock, but it makes stealing your car more difficult. This is why every Saab owner should always have an extra key available.
Most new Saabs come with two keys right from the factory, but you can add more at an agent using a handheld computer called Tech-2. Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception to this rule is the NG 9-3 cars, that have more modern, newer features that require a key-fob.
The dealer will replace the CIM or TWICE module of those cars if all keys are lost, and charge you a premium to do it. But we can reprogram the EEPROM on your computer and prepare it to accept new keys, and not replace the expensive modules.
How to replace the ignition Key on a Saab XC90
It may be time to replace your SAAB key fob if it is experiencing difficulty turning the barrel of your lock. The process is simple and you don't have to visit a dealer. You can complete the process at home with just a few basic tools.
First, you'll need to prepare the new keys. Before you begin, turn off the anti-theft feature by placing blocks underneath the rear wheels and activating your handbrake. After that, insert the key into the ignition and switch it to the on position which activates the accessories but it does not start the engine. Repeat this 5 times, and then put the key on the "on" position.
You'll then need to purchase a new case for your key fob. They can be found at any auto parts shop, and they're usually quite affordable. Based on the model, you may even buy them without electronic components.
To open the case, insert a flathead screwdriver inside the slot located in the middle. Gently work it. Once you split the case, you will be able to access all the internal electronics. Use a flathead screwdriver to gently pull out the electronics.